Rocker geometry

CORVETTE SPECIFIC - Applicable to all or most models

Moderators: DOC, MR.WOLF, australi, smackC4

User avatar
*Gold Class Member #245
Posts: 853
Joined: Wed Dec 01, 2010 12:13 pm
Location: Brisbane, QLD

Rocker geometry

Postby 68ragtop » Tue Aug 13, 2013 10:02 am

Came across an interesting paper on setting up rocker arm geometry recently. Thought I'd share the link in case anyone else might be interested:


User avatar
*Senior Forum User
Posts: 442
Joined: Sat Jul 23, 2011 10:30 pm
Location: Rockingham, WA

Postby Fissan » Tue Aug 13, 2013 12:08 pm

Thanks Azza, it is a good read and shows that there is more than just throwing a cam and rockers  in with out checking out the pushrod lengths. I have just gone through the process and have to go to 8.1" push rod from a 7.8" due to new cam heads and rockers. :o
Cheers Bruce

If you cant hear it before you see it..It's not loud enough!!

User avatar
*Gold Class Member #777
Posts: 3696
Joined: Sat Jun 21, 2008 12:41 pm
Location: Rocky QLD Australia

Postby DOC » Tue Aug 13, 2013 6:45 pm

Wow! That's an awful lot just to say you need 90 degrees at half open!

General Forum User
Posts: 1
Joined: Sun Oct 13, 2013 12:02 pm
Location: Gippsland VIC

Postby Waljr » Wed Mar 11, 2015 1:42 am

there's a vid here

Return to “General CORVETTE Technical and Performance”

Who is online

Users browsing this forum: No registered users and 1 guest