Australian Corvettes Association

Winfield RED · Posted: Wed May 20, 2009 7:57 pm Post subject:

Mate there is nothing wrong with being a tight arse. Im a tight arse, and i have no concern with you being a tight arse, just not "such a tight arse"... Chuckle

nifty · Posted: Thu May 21, 2009 6:00 pm Post subject:

<<<<<<<<<<<<<<<<< is the ultimate tight arse, and i HAD to run mine on premium...it would run on normal fuel, but didnt like it much....

Winfield RED · Posted: Thu May 21, 2009 8:43 pm Post subject:

Running any decent car on regular instead of premium is the ultimate display of tight arse-ness, so tight in the arse they dont even know it. Itll be numb from the clenching... Chuckle

Im very seriously contemplating getting an electric car soon, when they are built in such a way as is the Telsa is, the performance is so bloody good youll wet your pants when going from 0-100 in 3.7 seconds... I sure as hell wont sh*t my pants, i'll be to tight arsed from never buying petrol for a car again....

australi · Posted: Thu May 21, 2009 10:49 pm Post subject:

Winfield RED · Posted: Fri May 22, 2009 6:36 pm Post subject:

Because so many Corvette owners choose to barstardise their Corvettes by fitting the wrong parts that are not up to correct specs. That is how we got onto it id say.

Smithy007 · Posted: Fri May 22, 2009 6:46 pm Post subject:

TroppoVette · Posted: Sun May 24, 2009 8:52 pm Post subject:

Good to know I'm not the only one that cant s**t strawberry seeds!
So today I flew down , done the deal, he had washed it and put a full tank of fuel in it, It shone in the sun.....(is that a word)and I drove it home on a big sugar rush, 'cause I couldnt sleep last night....What a car!!!!4 hours off fun!..So I pulled up outside my house and gave it a big rev till the neighbours came out! I love this thing......!

Winfield RED · Posted: Mon May 25, 2009 8:53 pm Post subject:

Keep the rubber side down mate Very Happy

If you feel like a bit of a read, have a look at this link:
http://www.vetteweb.com/features/vemp_0807_1994_chevrolet_corvette/index.html

Ofcourse when i sent the info for that article, i DID mension this forum, but they made up their own sh*t when the article came out, alot of it is not exactly what i said, and some of it is changed around to suit them ( which doesnt bloody work real well )

TroppoVette · Posted: Wed May 27, 2009 7:48 pm Post subject:

Thats a good read, youve done a lot of work on vettes alright!

australi · Posted: Fri May 29, 2009 10:19 am Post subject:

Winfield RED · Posted: Fri May 29, 2009 12:08 pm Post subject:

Yeah i think they did mension MAXX Wrench in mine, id have to read it again. They pretty much put what they want.

Winfield RED · Posted: Fri May 29, 2009 12:11 pm Post subject:

I just had a look, they did mension it, however i think they spelt Don's last name incorrectly. They did get a fair few of the specs totally wrong too.

TroppoVette · Posted: Fri May 29, 2009 9:38 pm Post subject:

I've spent the last few days polishing my new toy and Im amazed the way it has come up. my wife comes into the shed and gives me "that look"but Im going to the the Ingham car and bike thing tomorrow, Im sure she will miss me....I ll post some pics of the beast soon....

Winfield RED · Posted: Sat May 30, 2009 10:39 am Post subject:

No worries mate thumbs

australi · Posted: Sat May 30, 2009 11:28 am Post subject:

TroppoVette · Posted: Sat May 30, 2009 8:16 pm Post subject:

Do you uys show your cars at show and shine events.....I saw a C4 entry today and it was very ordinary looking............

TroppoVette · Posted: Sat May 30, 2009 8:35 pm Post subject:

Are the adams products really that good!
The the that had mine washed it with sandpaper I think, but Ive buffed and buffed. can you really get rid of swirl?
Also the dash and console are have like an aluminium sort of look, but it has like a white spotty tarnished sort of look, like it has a clear coat that is damaged,....I dont know, I hope you know what Im talking about. Can I bring it back to good?

Winfield RED · Posted: Sat May 30, 2009 10:11 pm Post subject:

Troppo, mate i dont know your name im sorry. Its pretty easy to get rid of swirls, get a clay bar, that should do it. Brasso will get rid of deeper swirls, but id be cautious on that, ive used it on the 94 in the past, but you need to be sure you want to get that physical with it, cause once youre done, youll need to do a finer cut to remove the finer swirls youll put in as you remove the deeper ones.

As far as ordinary C4s at shows, mate ive seen some downright sh*theaps, and ive seen some that hardly run worth a damn when they turn up, and seen a combination of both.

Ive also seen alot of really top notch C4s that were let down by the lazy owner not putting in a full effort on the polishing, vacuuming, and general cleaning.

Being what i was to C4s, i notice almost everything at a quick glance. Some people call it picky, some call it arrogant, some can call it what they like, but C4s are like any other GM car, and they go downhill fast when neglected.

Jesus my neighbours up stairs are noisy barstards....

Adams products are exceptional, i use and prefer Bowden's Own myself, however i know Panther Kim well enough to know he wont put his name to rubish, and his word is good enough for me. When someone's word is good enough for me, it could almost be considered good enough for anyone else too.

Keep the rubber side down mate thumbs

TroppoVette · Posted: Sun May 31, 2009 7:15 am Post subject:

[quote="Winfield RED"]Troppo, mate i dont know your name im sorry.
Sorry I never introduced myself, My nane is Trevor, Trev is fine.

Winfield RED · Posted: Sun May 31, 2009 11:46 am Post subject:

No worries Trev, im Casey cheers

TroppoVette · Posted: Sun May 31, 2009 6:44 pm Post subject:

How do I post pics on here?[/img]

Winfield RED · Posted: Sun May 31, 2009 9:05 pm Post subject:

Upload them to photobucket, you can create a free account, www.photobucket.com then you need to copy the line under the photo you wish to post, it will be the 1 line of the 3 lines that starts and ends with [img][/img]

The other 2 lines underneath the picture will be for a link to the picture so it wont auto load, and the other i dont remember what it is for without looking at it, but you only need to concern yourself with the link saying "[img][/img]"

TroppoVette · Posted: Sun May 31, 2009 9:38 pm Post subject:

let me try[IMG]http://i697.photobucket.com/albums/vv333/Troppo/S this...

TroppoVette · Posted: Sun May 31, 2009 9:40 pm Post subject:

TroppoVette · Posted: Sun May 31, 2009 9:42 pm Post subject:

Yeehaa !!!Thanks Casey Here he is!...

TroppoVette · Posted: Sun May 31, 2009 9:46 pm Post subject:

TroppoVette · Posted: Sun May 31, 2009 9:49 pm Post subject:

Jarrad · Posted: Sun May 31, 2009 9:56 pm Post subject:

very clean mate - great buy. Time to get some exhaust mods happening Cool

nifty · Posted: Sun May 31, 2009 10:52 pm Post subject:

and im sure aernbuild awill agree...YOU GOT THE BEST COLOUR AS WELL.... tidy unit trev.you get it for 22k?
im NEV by the way..... nifty nev

TroppoVette · Posted: Mon Jun 01, 2009 5:17 am Post subject:

Hey Nev, I wasnt all that keen on white ...till I saw it!

....and I think your right about the exhaust Jarrad, doesnt quite sound the way I'd like....